Hercules Complete Recovery Kit + Thumper 12v Air Compressor 160L/M 150PSI

Hercules Complete Recovery Kit - 11-piece | Snatch, Winch & 4WD Gear | Adventure Kings

The perfect recovery kit built by 4WDers for 4WDers, independently tested for safety, stays ready in the back of your vehicle with included storage bag.

Our Hercules Complete Recovery Kit includes everything you need to get you and your vehicle recovered from a sticky situation.

All components have been independently tested. Don't pay a cent more than you have to for a quality recovery kit.

Contents:

• 1 x Snatch Block, 8,000kg
• 1 x Snatch Strap, 8,000kg, 9m x 60mm
• 1 x Tree Trunk Protector, 10,000kg, 3m x 75mm
• 1 x Extension Strap, 5,000kg
• 2 x Bow Shackles 4.7T each
• 1 x Winch Dampener
• 1x Folding Shovel
• 1x Kwiky Tyre Deflator 
• 1x Heavy Duty Gloves
• 1x Recovery Bag

Note: Not to be used for lifting

160L/Min 150psi Thumper Air Compressor | Inbuilt Gauge | 8m Air Hose | Adventure Kings

160L per minute high pressure output, Heavy duty 60mm alloy piston, Solid alloy chassis, pressure release safety valve + 8m high pressure hose included.

The Thumper MKII has been tried and tested all over Australia in the harshest and most unforgiving conditions, and no matter what you throw at it, the Thumper MKII is up to the challenge. Able to inflate five 31in 4WD tyres in just over 11 minutes, you can pull off the tough tracks, air up, and you’re half way home while other 4WD owners are still stuck at the servo!

Ideal for the 4WD, camper trailer, caravan and bikes, you can even use the Thumper MKII to inflate sporting equipment and air mattresses, thanks to the included adapters. 

NEW DESIGN – Better than the original Thumper, the Thumper MKII has an upgraded aluminium alloy cylinder head and is bigger and faster. 

HEAVY-DUTY – Made for real 4WDing! With rugged body, heavy-duty power cables and an 8m heavy duty rubber hose with inline pressure gauge. 

FAST – 160L of air per minute, and a maximum pressure of 150PSI, the Thumper MKII will completely inflate a 35in tyre from 0PSI to 30PSI in 3 min 25 sec.

As seen on Facebook we compared the Thumper MKII to the ARB High Output Compressor (p/n: CKMA12)
The $309 total cost of the ARB High Output Compressor is as quoted by:

Trent from ARB St Peters, 500 Princes Highway St Peters NSW at 2:46PM on the 02/02/16
*This model ARB Compressor doesn’t include a hose, just mounting bracket and wiring
*Price can also be confirmed with the ARB Pricing and Application Guide, available to download from ARB’s website