Adventure Kings 12V Control Box + 12V Battery Monitor

12V Control Box

Control 12V Equipment | 16A pre-wired switches | Cig Sockets | 2x USB ports

Ultra-premium quality for 12V DIY Fans!

This is the Adventure Kings 12V Control Box – a feature packed bit of gear that will make anyone’s 12V setup better! If you’ve been dreaming of an epic camping 12v system, then this is the bit of gear you’ve been waiting for. An ultra-premium quality product, without the premium price tag!

12V Control Box | Control 12V Equipment | 16A pre-wired switches | Cig Sockets | 2x USB ports

Compact enough to fit just about anywhere

First, the box itself is built with laser cut 1.5mm powder coated aluminium and the lid is 2mm thick for strength. Coming in at 400mm by 305mm and 80mm deep, it’s compact enough to fit just about anywhere while still providing plenty of room for all the switches, wiring and 12v gear.

Compact enough to fit just about anywhere

First, the box itself is built with laser cut 1.5mm powder coated aluminium and the lid is 2mm thick for strength. Coming in at 400mm by 305mm and 80mm deep, it’s compact enough to fit just about anywhere while still providing plenty of room for all the switches, wiring and 12v gear.

Easy to position

Going from the outside in, there’s a grommet on each side which makes it easy to position and wire this up, no matter where you want to mount it.

DESIGNED TO FIT A KINGS DC-DC CHARGER PERFECTLY!

On the front you’ll notice the space at the top left, along with the extra grommet – this space is designed so you can mount a DCDC charger directly onto the box – feed the wiring through the grommet and you can wire up to the internal posts for an all-in-one install.

DESIGNED TO FIT A KINGS DC-DC CHARGER PERFECTLY!

On the front you’ll notice the space at the top left, along with the extra grommet – this space is designed so you can mount a DCDC charger directly onto the box – feed the wiring through the grommet and you can wire up to the internal posts for an all-in-one install.

Easy to access fuse holder

Next up there’s an easy to access fuse holder – these fuses run the switches, plugs and sockets that run along the bottom of the control box.

3x Cig Sockets and 2x USB ports

From left to right you’ve got 2 quick connect plugs – the first can be easily configured as a solar input for your DCDC charger. Then there’s a voltmeter, three 20A-rated cig sockets and a double USB socket with 1amp and 2.1amp USB connections.

3x Cig Sockets and 2x USB ports

From left to right you’ve got 2 quick connect plugs – the first can be easily configured as a solar input for your DCDC charger. Then there’s a voltmeter, three 20A-rated cig sockets and a double USB socket with 1amp and 2.1amp USB connections.

5 x 16Amp rated rocker switches

Above that you’ll see 5 x 16Amp rated rocker switches – these are pre wired with fused power so you can easily switch any added accessories and circuits on and off. You even get a sheet of pre-labelled stickers to customise your setup for your own needs!

Dual 20A quick-connect fittings

Plug your Adventure Kings solar panel & regulator straight in for instant solar charging!

Dual 20A quick-connect fittings

Plug your Adventure Kings solar panel & regulator straight in for instant solar charging!

Incredible quality wiring throughout!

The face screws off and inside you’ve got a negative bus bar and negative M10 binding post as well as two positive binding posts for your starter and auxiliary batteries. That means wiring up both batteries for a dual battery system is easy!

Digital Voltage Indicator

Included sticker sheet for switches

Dimensions

Kings 12V Battery Monitor

Easy DIY Install | Adjustable Low-Voltage Cut off | LCD Display

Battery Monitor

low voltage disconnect in one

With the Adventure Kings 12V Battery Monitor (*PATENT APPLIED FOR) you can easily keep an eye on and control the power coming in and out of your auxiliary battery. Designed, engineered and rigorously tested by IntelliQuip Solutions; the same Aussie engineering team that developed the Adventure Kings DC-DC chargers, this is a smart bit of kit that is easy to install and instantly takes your 12V system to the next level.

Monitor voltage

First it gives you an instant read out of the battery voltage and the amount of current (in amps) that is either being charged into your battery or is coming out of your battery to power gear like fridges, camp lighting or other 12V Accessories.

Monitor voltage

First it gives you an instant read out of the battery voltage and the amount of current (in amps) that is either being charged into your battery or is coming out of your battery to power gear like fridges, camp lighting or other 12V Accessories.

Fully user programmable

with automatic reconnect

To prevent battery damage and over discharge it has a built in low voltage disconnect too. That means that if your accessories draw too much power out of the battery, it will disconnect them until the battery recovers or recharges – at that point it will automatically reconnect so your accessories continue working properly.

Current in/out and remaining battery %

It’s smart too and calculates the sum of the current. So, if your solar is providing 10 amps, but your accessories are drawing 2 amps, it will display 8 amps! This makes it easy to ensure your system is working correctly and you’re not over discharging your battery.

Current in/out and remaining battery %

It’s smart too and calculates the sum of the current. So, if your solar is providing 10 amps, but your accessories are drawing 2 amps, it will display 8 amps! This makes it easy to ensure your system is working correctly and you’re not over discharging your battery.

Over-voltage protection

It also has an over-voltage protection setting to protect your batteries from over-charging – and importantly all the parameters can be changed – so you can set the low point, recovery point and high voltage point to suit your setup. No more relying on a pre-set low voltage that’s way too low and risks permanently damaging your batteries!

User selectable current cut-off

up to 100 Amps

It also features an over current cut-off that you can set between 5 and 100 amps – this is ideal for preventing your battery being discharged too much or too quickly due to appliance faults or short circuits.

User selectable current cut-off

up to 100 Amps

It also features an over current cut-off that you can set between 5 and 100 amps – this is ideal for preventing your battery being discharged too much or too quickly due to appliance faults or short circuits.

Up to 360AH capacity

The Adventure Kings Battery Monitor suits batteries or battery banks between 80 and 360AH capacity. Plus, there are selectable profiles for lead acid, AGM or calcium battery types which allow the Battery Monitor to display an estimate of the remaining battery capacity with an easy percentage displayed on screen.

Ultra-low standby current draw

and manual ‘off’ function

Built into a tough and compact housing that’s able to work in harsh conditions from -10 to 60°C, as well as offering an easy to diagnose LED status indicator and very low standby power use (with a built in, programmable sleep mode that turns off screen illumination), this is the ideal way to monitor and protect your 12V setup!

Ultra-low standby current draw

and manual ‘off’ function

The Adventure Kings Battery Monitor suits batteries or battery banks between 80 and 360AH capacity. Plus, there are selectable profiles for lead acid, AGM or calcium battery types which allow the Battery Monitor to display an estimate of the remaining battery capacity with an easy percentage displayed on screen.

Please note

*PATENT APPLIED FOR: 2018322693

*Not compatible with Lithium batteries