Kings Plus 7” AP-X Driving Light + 2x 3.3" Work Light + Rear Lighting Wiring Harness

MORE LIGHT. MORE DISTANCE. TESTED PERFORMANCE

The Kings Plus 7" AP-X Driving Lights was developed to extend visibility far beyond factory lighting. A carefully engineered beam pattern combines long-range projection with broad peripheral illumination. Tested in a NATA-accredited Australian lab and producing a genuine 1 lux @ 891 m and 17,870 lumens per pair, it delivers the confidence to see further and react sooner, whether you're covering long distances on regional highways or navigating remote tracks after dark.

Dimensions

COMPACT AND VERSATILE 3.3-INCH MODEL

The 3.3-inch work light is perfect for tight spaces or compact setups. Despite its small size, it delivers a powerful flood of light with two Osram P8 LEDs. Its low-profile design makes it ideal for mounting on roof racks or other confined areas, offering flexibility without compromising performance.

ULTRA-BRIGHT OSRAM P8 LED PERFORMANCE

The Adventure Kings LED Work Light Range features genuine P8 Osram LEDs, designed to deliver an impressive flood of light. Available in 3.3-inch and 4.4-inch models, these work lights provide unmatched brightness for all your lighting needs, whether you're working, camping, or reversing. Expect high-performance illumination that lights up your environment with ease.

ULTRA-BRIGHT OSRAM P8 LED PERFORMANCE

The Adventure Kings LED Work Light Range features genuine P8 Osram LEDs, designed to deliver an impressive flood of light. Available in 3.3-inch and 4.4-inch models, these work lights provide unmatched brightness for all your lighting needs, whether you're working, camping, or reversing. Expect high-performance illumination that lights up your environment with ease.

ENERGY-EFFICIENT AND LONG-LASTING

These work lights are ultra-bright and efficient, drawing less than 1 amp each. This means you can keep them running for hours without worrying about draining your battery. Perfect for long nights at camp or extended work hours, these lights provide reliable, energy-efficient performance.

BUILT TO ENDURE EXTREME CONDITIONS

The Adventure Kings Work Lights are designed to withstand extreme environments. With an IP67 water and dust-proof rating, these lights are rugged and durable, able to handle any weather condition. Whether you're driving through rain, mud, or dust, these lights will keep performing flawlessly.

BUILT TO ENDURE EXTREME CONDITIONS

The Adventure Kings Work Lights are designed to withstand extreme environments. With an IP67 water and dust-proof rating, these lights are rugged and durable, able to handle any weather condition. Whether you're driving through rain, mud, or dust, these lights will keep performing flawlessly.

SLEEK, MODERN DESIGN AND EASY INSTALLATION

Featuring a blackout finish and aggressive frame cutouts, the work lights offer a modern, stealth look that enhances any setup. The updated mounting bracket provides over 180 degrees of flexibility, allowing you to position the lights exactly where you need them. With easy installation and a versatile range of motion, adjusting the light for work, camping, or reversing is a breeze.

Dimensions

Adventure Kings Rear Lighting Wiring Harness

For Rear-Mounted Camping & Work Lights | Plug n Play Harness

THE EASIEST WAY TO POWER REAR OR SIDE-MOUNTED LED LIGHTS!

If you’re setting up rear or side-mounted LED lights to use for camping, dark jobsites or anywhere you need bright light at the flick of a switch, the Kings Rear Lighting Wiring Harness is the perfect solution! .

Adventure Kings Rear Lighting Wiring Harness

POWER AT THE FLICK OF A SWITCH

Similar to our driving light and lightbar harnesses, the key difference is the relay does not rely on a highbeam headlight trigger. Instead, you control your lights by turning the included flush-mount rocker switch on or off - it’s that easy.

POWER AT THE FLICK OF A SWITCH

Similar to our driving light and lightbar harnesses, the key difference is the relay does not rely on a highbeam headlight trigger. Instead, you control your lights by turning the included flush-mount rocker switch on or off - it’s that easy.

DESIGNED FOR ULTIMATE EASE OF INSTALLATION

There’s no cutting, joining or soldering required with the Kings Rear Lighting Wiring Harness - all you need is spanners to connect it to your battery, and the rest of the connections are handled with Plug n Play Deutsch DT-style connectors that are compatible with all Kings LED lightbars and worklights.

ENOUGH LENGTH - BECAUSE SIZE MATTERS

There’s enough room with this incredible light harness to set it up exactly how YOU want to. Mount the relay wherever you want, and from there you get a 1.3m long Y-splitter cable, and a pair of 2.0m long extension cables. There’s even a 2.7m long cable up to the switch, meaning you could easily mount the relay in the back of your vehicle near your second battery, connect to a separate LED work light on either side of your roofrack, AND have it controlled with a switch mounted in your dash!

ENOUGH LENGTH - BECAUSE SIZE MATTERS

There’s enough room with this incredible light harness to set it up exactly how YOU want to. Mount the relay wherever you want, and from there you get a 1.3m long Y-splitter cable, and a pair of 2.0m long extension cables. There’s even a 2.7m long cable up to the switch, meaning you could easily mount the relay in the back of your vehicle near your second battery, connect to a separate LED work light on either side of your roofrack, AND have it controlled with a switch mounted in your dash!

QUALITY COMPONENTRY FOR SERIOUS LONGEVITY

There’s no cutting corners here - this amazing harness is built from the right stuff. Quality 12AWG cabling carries power properly along the full length of the harness, a 40A relay handles the job of directing power as needed, and a 25A inline blade fuse keeps the entire circuit protected. Too good!